youhwa.blogg.se - Obd ads interface

ObdComPort: COM port name for OBD interface.

The standard ICOM configuration page could be found at: (no login required). When using BMW ICOM, change the values of EnetControlPort and EnetDiagnosticPort to the output from the BMW ICOM web interface line:Įxample: Diag Addr: 0x10 Diagnostic Port: 50160 Control Port: 50161įor automatic ICOM allocation set EnetIcomAllocate to 1, otherwise manual allocation via iToolRadar or the web interface is required!

EnetTimeoutConnect, TimeoutConnect: Connect timeout for ENET protocol, default is 5000.

EnetDiagnosticPort, DiagnosticPort: Diagnostic port for ENET protocol, standard is 6801.

EnetControlPort, ControlPort: Control port for ENET protocol, standard is 6811.

EnetTesterAddress: Tester address for ENET protocol, standard is 0xF4.auto:: Broadcast to all interfaces that start with (case ignored).auto:all: Broadcast to all network interfaces.auto: Broadcast to 169.254.255.255, Identical to EDIABAS RemoteHost = Autodetect.ip address: No broadcast, directly connect to specified host.EnetRemoteHost: Remote host for ENET protocol.TraceBuffering: 1=Enable buffering of API trace files.Interface: Interface to use: STD:OBD, ADS (ADS operates also with FTDI USB converter) or ENET.The following properties could be specified in this file: Standard properties

It must be located in the same directory as the EdiabasLib.dll or Api32.dll file. The nfig file is a replacement for the standard EDIABAS.INI file.